Accessories UFM Line5 RX

Features of the PSB

As an option to our universal joining modules UFM Line5 RX we offer the PROMESS Safety Box PSB RX. It is suitable as an alternative to control cabinet integration for production in automated assembly lines and contains all necessary safety functions and power components. A separate bus system allows the press control system to communicate directly with the safety control system and simplifies remote diagnosis.

During the development, great importance was attached to fast commissioning and the compact design. The box can be conveniently mounted near the servo press, reducing cable lengths and eliminating the need for wiring. Your servo press is thus ready for operation within a very short time.

Advantages:

Master and slave boxes for multi-axis operation
Support of all common bus systems
Integration of all electrical and safety components
PLe for STO as standard
Extension to SLS, SS1, SS2 possible
Quick commissioning: Plug & Play
Switch cabinet not applicable
No wiring effort
Completely checked and tested
IP 54 protection

Features of the PSD RX

The safety module PSD RX is supplied as a ready-to-install and tested module. Among other things, it contains the power electronics and the safety control for the joining unit. The following safety functions can be realised: STO in Ple according to DIN ISO 13849-1; optional: SSx and SLS in PLd according to DIN ISO 13849-1 (for UFM Line5 RX with safety brake). The safety module facilitates and speeds up the commissioning of the assembly unit. It is suitable for our UFM Line5 RX units with and without brake, provided that it is controlled via a field bus.

Advantages:

Short commissioning times
No wiring effort
Completely checked and tested
EMV tested

Assembled components

AC servo amplifier
Controller RX
Braking Resistor
EMC components, mains filters
Safety control: Safety functions STO in Ple to DIN EN ISO 13849-1; optional: SSx and SLS in PLd to DIN ISO 13849-1 (for UFM Line5 RX with safety brake)
Fieldbus interface (must be ordered separately)
Cable set (must be ordered separately)
Required connections (connected to pins): Power supply
24-volt emergency stop circuit

PROMESS Digital Module

For our new servo press series UFM Line5 RX we offer the PDM-S module for amplifying a DMS force transducer signal.

The PDM-S features:

1 input for the connection of a strain gauge force transducer
1 encoder input for the connection of digital measuring sensors

Further extensions will follow.

Our robust C-frames are characterised by their good accessibility from the front and the side, their high rigidity and low bending. They are particularly suitable for integration into assembly lines or machines.

The lower plates are provided as standard with a central bore and 2-T-slots for optimum tool holding. The upper plates are completely prepared to accommodate the corresponding joining module.

Our four-column frames are suitable for applications with centric axial force application. They have the advantage of low bending, which only has a parallel effect.

The lower plates are provided as standard with a central bore and 2-T-slots for optimum tool holding. The upper plates are completely prepared to accommodate the corresponding joining module.