The NC joining systems of the UFM Classic series offer a large selection of load ranges and nominal strokes and thus numerous configuration options. Depending on the customer's task, the servo presses are equipped with strain gauges or piezo force measurement technology and have a flexible drive concept in which the motor is angled or mounted inline with the press mechanics as required. The modular structure allows integration in an assembly line as well as the installation in manual workstations or in table presses.
Module | Force [kN] | Stroke [mm] | Speed [mm/s] | Article-no. | Data sheet | Drawings | Brochure |
---|---|---|---|---|---|---|---|
UFM | 500 | 400 | 50 | 37510500G2 | ▼ | ▼ | ▼ |
UFM | 300 | 450 | 100 | 3740300G2 | ▼ | ▼ | |
UFM | 150 | 400 | 145 | 3740151G2 | ▼ | ▼ | |
UFM | 100 | 180 | 110 | 374111G2 | ▼ | ▼ | |
UFM | 100 | 330 | 200 | 374103G2 | ▼ | ▼ | |
UFM | 80 | 330 | 200 | 374091G2 | ▼ | ▼ | |
UFM | 80 | 180 | 150 | 374181G2 | ▼ | ▼ | |
UFM | 60 | 330 | 240 | 374065G2 | ▼ | ▼ | |
UFM | 60 | 180 | 150 | 374060G2 | ▼ | ▼ | |
UFM | 40 | 330 | 240 | 374043G2 | ▼ | ▼ | |
UFM | 40 | 180 | 150 | 374040G2 | ▼ | ▼ | |
UFM | 30 | 350 | 230 | 374130G2 | ▼ | ▼ | |
UFM | 30 | 180 | 150 | 374131G2 | ▼ | ▼ | |
UFM | 20 | 350 | 230 | 374023G2 | ▼ | ▼ | |
UFM | 20 | 180 | 150 | 374125G2 | ▼ | ▼ | |
UFM | 15 | 200 | 240 | 374014G2 | ▼ | ▼ | |
UFM | 12 | 200 | 240 | 374012G2 | ▼ | ▼ | |
UFM | 5 | 200 | 240 | 374005G2 | ▼ | ▼ | |
UFM | 3 | 100 | 120 | 374003G2 | ▼ | ▼ |
The NC joining systems of the UFM Classic series offer a large variety of load ranges and nominal strokes. A special synchronous belt connects the motor directly with ball/roller gear drive and guarantees a positioning accuracy of 0.01 mm. The angled motor favours a low installation height. This is of high importance if the unit has to be installed under a conveyor belt or a transfer system.
The mechanics comprise of the following components:
Modular and networkable
The mechanics are triggered via a power amplifier with integrated NC-module. The risk processor fitted in the NC-module takes over the control and monitoring of the assembly unit. It can be programmed comfortably and easily with PROMESS software using a commercially available PC and thus guarantees the user the highest operating comfort as well as maximum reliability.
The force-distance course can be monitored by envelope or windows functions. Quality control data and press programs can be stored via the data base plug-in and can be used again at any time. The system features a digital pre amplifier that transmits the force signal trouble-free with a resolution of 24 Bit. The calibration by measuring map allows for a very high accuracy of the force measuring and replaces the switchover of measuring ranges.
ADVANTAGES OF THE CONTROL
Intuitive and flexible
The UFM Software V5.XX features a transparent interface which provides simple operation. An integrated user administration with password input and rights management provides for quality assurance and traceability of the production process. The extended data base supports the server based systems SQL Server and Oracle.
New query and filter possibilities of the DB-Viewer display the requested records. Programs and editing can be stored and ever used again so that changes in the program can be retraced at any time. The real time envelope test allows for an immediate stop of the press in case of the limits being broken. The monitoring of the limit curves and the setting of the status are carried out in real time. The force-distance course can be monitored by envelope or windows functions.
Software Highlights
The NC joining systems of the UFM Classic series offer a large selection of load ranges and nominal strokes and thus numerous configuration options. Depending on the customer's task, the servo presses are equipped with strain gauges or piezo force measurement technology and have a flexible drive concept in which the motor is angled or mounted inline with the press mechanics as required. The modular structure allows integration in an assembly line as well as the installation in manual workstations or in table presses.
Module | Force [kN] | Stroke [mm] | Speed [mm/s] | Article-no. | Data sheet | Drawings | Brochure |
---|---|---|---|---|---|---|---|
UFM | 500 | 400 | 50 | 37510500G2 | ▼ | ▼ | ▼ |
UFM | 300 | 450 | 100 | 3740300G2 | ▼ | ▼ | |
UFM | 150 | 400 | 145 | 3740151G2 | ▼ | ▼ | |
UFM | 100 | 180 | 110 | 374111G2 | ▼ | ▼ | |
UFM | 100 | 330 | 200 | 374103G2 | ▼ | ▼ | |
UFM | 80 | 330 | 200 | 374091G2 | ▼ | ▼ | |
UFM | 80 | 180 | 150 | 374181G2 | ▼ | ▼ | |
UFM | 60 | 330 | 240 | 374065G2 | ▼ | ▼ | |
UFM | 60 | 180 | 150 | 374060G2 | ▼ | ▼ | |
UFM | 40 | 330 | 240 | 374043G2 | ▼ | ▼ | |
UFM | 40 | 180 | 150 | 374040G2 | ▼ | ▼ | |
UFM | 30 | 350 | 230 | 374130G2 | ▼ | ▼ | |
UFM | 30 | 180 | 150 | 374131G2 | ▼ | ▼ | |
UFM | 20 | 350 | 230 | 374023G2 | ▼ | ▼ | |
UFM | 20 | 180 | 150 | 374125G2 | ▼ | ▼ | |
UFM | 15 | 200 | 240 | 374014G2 | ▼ | ▼ | |
UFM | 12 | 200 | 240 | 374012G2 | ▼ | ▼ | |
UFM | 5 | 200 | 240 | 374005G2 | ▼ | ▼ | |
UFM | 3 | 100 | 120 | 374003G2 | ▼ | ▼ |
The NC joining systems of the UFM Classic series offer a large variety of load ranges and nominal strokes. A special synchronous belt connects the motor directly with ball/roller gear drive and guarantees a positioning accuracy of 0.01 mm. The angled motor favours a low installation height. This is of high importance if the unit has to be installed under a conveyor belt or a transfer system.
The mechanics comprise of the following components:
Modular and networkable
The mechanics are triggered via a power amplifier with integrated NC-module. The risk processor fitted in the NC-module takes over the control and monitoring of the assembly unit. It can be programmed comfortably and easily with PROMESS software using a commercially available PC and thus guarantees the user the highest operating comfort as well as maximum reliability.
The force-distance course can be monitored by envelope or windows functions. Quality control data and press programs can be stored via the data base plug-in and can be used again at any time. The system features a digital pre amplifier that transmits the force signal trouble-free with a resolution of 24 Bit. The calibration by measuring map allows for a very high accuracy of the force measuring and replaces the switchover of measuring ranges.
ADVANTAGES OF THE CONTROL
Intuitive and flexible
The UFM Software V5.XX features a transparent interface which provides simple operation. An integrated user administration with password input and rights management provides for quality assurance and traceability of the production process. The extended data base supports the server based systems SQL Server and Oracle.
New query and filter possibilities of the DB-Viewer display the requested records. Programs and editing can be stored and ever used again so that changes in the program can be retraced at any time. The real time envelope test allows for an immediate stop of the press in case of the limits being broken. The monitoring of the limit curves and the setting of the status are carried out in real time. The force-distance course can be monitored by envelope or windows functions.
Software Highlights